What is the maximum width of spacing between scaffold planking under normal conditions?

The standard requires that the space between the scaffold planks or between scaffold planks and uprights be no more than one inch wide unless the employer can demonstrate that a wider space is necessary. However, the platform must still be planked or decked as fully as possible.

Scaffold planks must be secured against any movement in any direction (including uplift). Scaffold planks must extend a minimum of 150 mm (6 in.) and a maximum of 300 mm (12 in.) beyond their supports.

One may also ask, what is OSHA Standard for scaffold? The standard requires employers to protect each employee on a scaffold more than 10 feet (3.1 m) above a lower level from falling to that lower level.

In this manner, how wide are scaffolding planks?


How much weight can a scaffold plank hold?

The type of scaffolding being used is rated as light-duty, or 25 pounds per square foot. Multiply 35 square feet by 25 pounds per square foot and the scaffolding can be loaded with no more than 875 pounds.

What are the 3 types of scaffolds?

Three basic types, supported, suspended and rolling, as in baker’s scaffold, or aerial lifts such as scissor lifts, boom lifts etc.

How long is a scaffolding plank?

New 3.9m / 13ft Scaffold Boards. Size 38 mm thick x 225 mm, fitted with end hoop irons for protection. Flame proof scaffold boards are also available on request.

How do you secure scaffolding planks?

Use a ladder to safely and easily access a scaffold, especially when you’re working with wood planks hanging over the ends. Run the ladder at least 3 ft. past the surface of the planks. Lean the ladder on the wall rather than the scaffold itself or you could tip it over when climbing up.

Why is fully planked scaffold important?

Another reason to fully plank or deck the platform, is the load that needs to be carried. A fully planked or decked platform will help divide the load (workers, materials and tools) more evenly, putting less stress on each individual unit.

What is a scaffold plank?

Solid-sawn plank. Traditionally, scaffold planks were solid-sawn lumber, often full-thickness 2x10s, as opposed to the 2-inch nominal thickness lumber (actual thick- ness, 11⁄2 inches) used for most construction needs.

What is light medium and heavy duty scaffolding?

Scaffold working platforms are generally rated as light, medium or heavy duty: • Light duty – up to 225kg per bay, suitable for work undertaken by a maximum of two. people with a maximum of 65kg of tools and materials (eg. painting, electrical work and. carpentry tasks).

What wood is used for scaffold planks?


How deep is a scaffold board?

Available in 4 different lengths they are 225mm wide by 45mm deep and conform to bs2482. We only purchase scaffold boards to bs2482. These must be supported every 1.5 meters.

Can warped wood be straightened?

To straighten warped wood, I soak in water. Or if you can’t submerse them put a wet cloth on the inside of the warp curve, and soak until straight. And, once it is finalized then seal the grain against future water and the wood glue will stay in there and never warp again, stronger than the piece would be originally.

How do you join two pieces of wood together?

Method 1 Making an Edge Joint Arrange your boards and mark them with chalk. Lay the boards across strips of scrap wood. Apply an even bead of glue along the edge of a board. Clamp the boards and ensure they’re flush. Wipe away excess glue after 20 minutes. Allow the glue to cure overnight.

What is the maximum length of a scaffold board?

63mm x 225mm boards will have a maximum support span of 2.5m (which is down from 3.26m in the earlier standard). This should not present any issues when used as battens on proprietary system scaffolds where the lengths are generally shorter.